RHINO RAMV2 Manuel d'instructions télécharger pdf (Page 30)

3.4. Phone Number Memory

The Rhino RAM alarm is able to be programmed with up to 5 different mobile phones,

so when the alarm is armed or put in to panic mode and activates it will send a SMS

message to each of the phone numbers in the systems memory.

3.4.1. To Read Phone Numbers From The System

BY SMS ONLY

Type your PIN number and READPHONE, and send it to your alarm you can find

out the different mobile numbers that are programmed into the system.

(WHERE 123456 = YOUR PIN NUMBER)

You will then receive a reply SMS message

back stating all the phone numbers in the alarm

systems memory.

E.G.

Phone Numbers:

1: 0409986655, 2: 040411689, 3: Not Used, 4: Not Used, 5: 0414222345

3.4.2. To Erase Phone Numbers From The System

BY SMS ONLY

There are 5 memory locations for mobile phones. Type your PIN number and

ERASEPHONEX, and send it to your alarm you can erase the mobile phone number

that is stored in the location identified by ‘X’ in the alarm system.

EG: 123456ERASEPHONE3 – will erase the phone number stored in location 3 in the

alarm memory.

You will then receive a reply SMS message

back stating all the phone numbers that are

stored in the alarm systems.

E.G.

Phone Numbers: 1: 0409986655, 2: Not Used, 3: Not Used, 4: Not Used, 5: 0414222345

123456READPHONE

123456

ERASEPHONE4

123456

READPHONE

123456

ERASEPHONE4

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

RHINO RAMV2 Manuel d'instructions Page 30