RHINO RC456 Manuel de l'opérateur télécharger pdf (Page 65)

MAINTENANCE

RC456 02/12 Maintenance Section 5-3

MAINTENANCE

STORAGE

To prepare your Rake for storage:

1. Clean the rake following instructions and allow it to dry.

2. Thoroughly tighten all screws and bolts.

3. Store the rake on a clean, dry surface in the down (working) position.

4. Grease the machine thoroughly and then cover it completely and store in a dry place.

5. Lubricate all points and slides before storage. This prevents corrosion.

NOTE: Now would be a good time to replace all damaged or worn parts, and have a machine in perfect

condition ready for use the next season.

During extended periods of inactivity it is necessary to close the cylinders completely. This

must be done in is such a way as to protect the rods from weather effects.

The rods remaining outside the cylinder (whatever reason may be) must be carefully protected with a grease

layer.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70

Pas de commentaire

RHINO RC456 Manuel de l'opérateur Page 65